Img  «« Home

Back to Services Overview

Precast Quickscan
First-Time-Right

Why a Quickscan ?!

The Quickscan is an ideal instrument to increase quality, improve efficiency and reduce failure costs. And after all, a good final product costs less in its entirety, provides a better workflow and results in a satisfied customer.
A Quickscan can be performed once as a snapshot, but is particularly suitable for periodically monitoring the quality improvement in a specified period. If desired, safety, sustainability, circularity, energy consumption, or CO2 production can also be assessed additionally.

Quickscan – the tool for the optimization of your prefab process

First-Time-Right

Img

What are your benefits

with the Concrefy Quickscan ?

  • The Quickscan simply takes place during production (working hours)
  • By working together you make use of more than 30 years of experience in the precast concrete industry
  • Workable advice that can quickly result in quality improvement, process optimization and cost reduction.
  • Exploiting the synergy effect (concrete technology, production processes, quality systems and product requirements)
  • Communication for and at every level
  • The performance of your production process becomes measurable, so that adjustments can be made concrete and measured.
  • Problems can be dealt with quickly and usually easily
  • Save costs
  • Possible periodic check for insight into
    progress and/or benchmark
Back to Top

Step-by-step process - Quickscan

Step 1: Intake
We will discuss with you what the 1st Quickscan will look like based on your information. A Quickscan focuses on critical success factors that are coordinated in advance.
Step 2: Inventory tour
We always start with an assessment of the end product.
Based on this assessment, it is determined which aspects (production, processing, storage and transport) can be optimized to improve the quality of the end product.
Step 3: Laboratory analysis
We always start with an assessment of the end product.
Based on this assessment, it is determined which aspects (production, processing, storage and transport) can be optimized to improve the quality of the end product.
Step 4: Optimization
The result of the Quickscan is a concise report in which the most important bottlenecks and opportunities for improvement and results are described
Back to Top

Inventory tour- details

We always start with an assessment of the end product, because a good end product costs less, gives you a satisfied customer and gives a better workflow.
Based on this assessment, it is examined which aspects can be optimized in production, processing, storage and transport in order to improve the quality of the end product

Img  Storage Inspection - Finished Product

  • What does the storage look like, is it tidy, are there any potential problems that could damage the finished product?
  • After that, we will continue to look at the products on the bag field, are there any damages, discolorations, etc

Img  Production & work preparation
         Technical screening of the production process

  • Internal transportation
  • Demoulding
  • Harden, Condition
  • Depositing, processing, finishing
  • Dosing mortar, cube transport
  • Mixing, dosing raw materials, mixtures
  • Placing insulation, recesses
  • Placing reinforcement, lifting facilities
  • Molds, magnets, cleaning

Img  Reviewing
         Supply & storage of raw materials

  • Quantities, dosing of raw materials, & mixtures
  • Post-treatment, finishing, storage
  • Research fresh concrete (mixtures), take materialsamples
  • Laboratory research
Back to Top

Optimization - advice

Results

  • Clear analysis and advice with concrete improvement proposals
  • Tool for optimization and innovation
  • Errors can be addressed early and quickly
  • Immediate insight into product quality
  • More support through independent analysis
  • Steering together on results
  • Less (failure) costs
  • Better products
  • Satisfied customers
  • Periodic evaluation with management and production

Reporting

  • Digital reporting
  • The report is available a few days after the Quick Scan
  • The report consists of 2 parts: technical information and management information en
  • Clear reporting based on pragmatic scorecards

Img

Dirk Pero

Head of Laboratory en Concsultancy

The Concrefy Quickscan is a ideal instrument for quality and improve efficiency and to minimize failure costs

T +31 77 8507 222
Dirk.Pero@concrefy.com

Back to Top
Back to Services Overview

Get in touch

Img

Leave a message to get in touch with the Concrefy team. We're looking forward to hearing from you.

Thank you for your message.

Unfortunately there has been an error.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Contact us

Follow us

Downloads

Img

Visiting address

Concrefy B.V.
Olivier van Noortweg 10
5928 LX Venlo
The Netherlands

Headquarter

Concrefy B.V.
Olivier van Noortweg 10
5928 LX Venlo
The Netherlands
Tel +31 77 850 7222
Fax +31 77 850 7223

Chamber of commerce: 51652293
VAT: NL850112680B01

Subsidiary

Concrefy GmbH
Trappstraße 6 - 8
46483 Wesel
Germany
Tel +31 77 850 7222
Fax +31 77 850 7223

Chamber of commerce:
AG Duisburg HRB 24010
VAT: DE278519744